View APT60GL120JU3_4794160.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

APT60GL120JU3
ISOTOP(R) Buck chopper Trench + Field Stop IGBT4 Power module
C
VCES = 1200V IC = 60A @ Tc = 80C
Application * AC and DC motor control * Switched Mode Power Supplies Features * Trench + Field Stop IGBT 4 Technology - Low voltage drop - Low leakage current - Low switching losses - Soft recovery parallel diodes - Low diode VF - Low leakage current - RBSOA and SCSOA rated * ISOTOP(R) Package (SOT-227) * Very low stray inductance * High level of integration Benefits * Low conduction losses * Stable temperature behavior * Very rugged * Direct mounting to heatsink (isolated package) * Low junction to case thermal resistance * Easy paralleling due to positive TC of VCEsat * RoHS Compliant
G
E
A
E G C
A
ISOTOP(R)
Absolute maximum ratings
Symbol VCES IC ICM VGE PD RBSOA Parameter Collector - Emitter Breakdown Voltage Continuous Collector Current Pulsed Collector Current Gate - Emitter Voltage Maximum Power Dissipation Reverse Bias Safe Operating Area TC = 25C TC = 80C TC = 25C TC = 25C Tj = 150C Max ratings 1200 80 60 100 20 280 100A @ 1100V Unit V A V W
These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com
www.microsemi.com
1-5
APT60GL120JU3 - Rev 0 July, 2009
APT60GL120JU3
All ratings @ Tj = 25C unless otherwise specified Electrical Characteristics
Symbol Characteristic ICES VCE(sat) VGE(th) IGES Zero Gate Voltage Collector Current Collector Emitter saturation Voltage Gate Threshold Voltage Gate - Emitter Leakage Current Test Conditions VGE = 0V, VCE = 1200V Tj = 25C VGE = 15V IC = 50A Tj = 150C VGE = VCE , IC = 1.6mA VGE = 20V, VCE = 0V Min Typ 1.85 2.25 5.8 Max 250 2.25 6.5 400 Unit A V V nA
5.0
Dynamic Characteristics
Symbol Characteristic Cies Coes Cres QG Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Eon Eoff Isc Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Short Circuit data Test Conditions VGE = 0V VCE = 25V f = 1MHz VGE= 15V ; VCE=600V IC=50A Inductive Switching (25C) VGE = 15V VCE = 600V IC = 50A RG = 8.2 Inductive Switching (150C) VGE = 15V VCE = 600V IC = 50A RG = 8.2 TJ = 25C VGE = 15V VCE = 600V TJ = 150C IC = 50A TJ = 25C RG = 8.2 TJ = 150C VGE 15V ; VBus = 900V tp 10s ; Tj = 150C Min Typ 2770 205 160 0.38 130 20 300 45 150 35 350 80 3.8 5.5 2.5 4.5 200 ns Max Unit pF C
ns
mJ mJ A
Chopper diode ratings and characteristics
Symbol Characteristic VRRM Maximum Peak Repetitive Reverse Voltage IRM IF VF trr Qrr Maximum Reverse Leakage Current DC Forward Current Diode Forward Voltage IF = 30A IF = 60A IF = 30A IF = 30A VR = 800V di/dt =200A/s Test Conditions VR=1200V Tj = 25C Tj = 125C Tc = 80C Min 1200 Typ Max 100 500 30 2.6 3.2 1.8 300 380 360 1700 3.1
APT60GL120JU3 - Rev 0 July, 2009
Unit V A A V
Tj = 125C Tj = 25C Tj = 125C Tj = 25C Tj = 125C
Reverse Recovery Time Reverse Recovery Charge
ns nC
www.microsemi.com
2-5
APT60GL120JU3
Thermal and package characteristics
Symbol Characteristic RthJC RthJA VISOL TJ,TSTG TL Torque Wt Junction to Case Thermal Resistance Junction to Ambient (IGBT & Diode)
RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz
Min IGBT Diode 2500 -55
Typ
Max 0.53 1.2 20 175 300 1.5
Unit C/W V C N.m g
Storage Temperature Range Max Lead Temp for Soldering:0.063" from case for 10 sec Mounting torque (Mounting = 8-32 or 4mm Machine and terminals = 4mm Machine) Package Weight
29.2
SOT-227 (ISOTOP(R)) Package Outline
31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 11.8 (.463) 12.2 (.480) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places)
r = 4.0 (.157) (2 places)
4.0 (.157) 4.2 (.165) (2 places)
25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504)
3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) 38.0 (1.496) 38.2 (1.504)
1.95 (.077) 2.14 (.084)
Anode
Collector
* Emitter terminals are shorted internally. Current handling capability is equal for either Emitter terminal.
Emitter
Gate
Dimensions in Millimeters and (Inches)
ISOTOP(R) is a registered trademark of ST Microelectronics NV
www.microsemi.com
3-5
APT60GL120JU3 - Rev 0 July, 2009
APT60GL120JU3
Typical Performance Curve
100 80 IC (A) 60 40 20 0 0 1 2 VCE (V) 3 4 Output Characteristics (VGE=15V) Output Characteristics 100 TJ = 150C
TJ=25C TJ=150C
80 60 IC (A) 40 20 0 0 1
VGE=19V VGE=15V
VGE=9V
2 VCE (V)
3
4
100 80 60 40 20 0 5 6
Transfert Characteristics
TJ=25C
20 16 12 E (mJ) 8
Energy losses vs Collector Current
VCE = 600V VGE = 15V RG = 8.2 TJ = 150C
Eon
IC (A)
TJ=150C
Eoff
4 0
7
8
9
10
11
12
13
0
20
40
60 IC (A)
80
100
VGE (V) Switching Energy Losses vs Gate Resistance 12 10
Eon
Reverse Bias Safe Operating Area 120 100
E (mJ)
IC (A)
8 6 4 2 0
VCE = 600V VGE =15V IC = 50A TJ = 150C
Eoff
80 60 40 20 0
VGE=15V TJ=150C RG=8.2
10 20 30 Gate Resistance (ohms)
40
0
300
600 900 VCE (V)
1200
1500
maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 0.6 Thermal Impedance (C/W) 0.5 0.4 0.3 0.2 0.1
0.9 0.7 0.5 0.3 0.1 0.05
IGBT
Single Pulse
0 0.00001
0.0001
0.001
0.01
0.1
1
10
rectangular Pulse Duration (Seconds)
www.microsemi.com
4-5
APT60GL120JU3 - Rev 0 July, 2009
APT60GL120JU3
Operating Frequency vs Collector Current Fmax, Operating Frequency (kHz) 125 100 75 50 25 0 10 20 30 40 50 IC (A) 60 70 80 90
ZVS ZCS
80 IF, Forward Current (A)
VCE=600V D=50% RG=8.2 TJ=150C Tc=75C
Forward Characteristic of diode
60
TJ=125C TJ=25C
40
20
Hard switching
0 0 0.5 1 1.5 2 2.5 3 3.5 4 VF, Anode to Cathode Voltage (V)
maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration Thermal Impedance (C/W) 1 0.8 0.6 0.4 0.2 0.9 DIODE 0.7 0.5 0.3 0.1 0.05 0.0001 0.001 Single Pulse 0.01 0.1 1 10
0 0.00001
Rectangular Pulse Duration in Seconds
Microsemi reserves the right to change, without notice, the specifications and information contained herein
Microsemi's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743 7,352,045 5,283,201 5,801,417 5,648,283 7,196,634 6,664,594 7,157,886 6,939,743 7,342,262 and foreign patents. U.S and Foreign patents pending. All Rights Reserved.
www.microsemi.com
5-5
APT60GL120JU3 - Rev 0 July, 2009

▲Up To Search▲

Price & Availability of APT60GL120JU3

	To Download APT60GL120JU3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .